FAQ   (Frequently Asked Questions)

ORVR

(Onboard Refueling Vapor Recovery)

Frequently Asked Questions (FAQs) as of April 21, 1997.

Follow links to answers below.

FAQ001  What, exactly, is ORVR?

FAQ002 What, in general, does Vapor Recovery mean?

FAQ003 What is meant by Stage(Phase) I Vapor Recovery?

FAQ004 What is meant by Stage(Phase) II Vapor Recovery?

FAQ005  Why do we need  ORVR?

FAQ006 What is the schedule for implementation of ORVR?

Go Back to Home Page

FAQ001  What, exactly, is ORVR?

 The initials ORVR stand for Onboard Refueling Vapor Recovery.

 The concept of ORVR is to include a system within an automobile (or similar automotive vehicle) such that vapors accumulated in the fuel tanks, as well as new fuel vapors generated during refueling, are captured within the vehicle ("onboard") rather than depending on external methods (known as Stage II vapor recovery) to efficiently collect the vapors before they can escape into the atmosphere.

Current ORVR technologies generally consist of Activated Carbon Canisters (ACC) which absorb the hydrocarbons (HCs) contained in the vapors forced out of the vehicle while refueling is occurring.

Go Back to FAQ.

FAQ002 What, in general, does Vapor Recovery mean?

 In the context of ORVR and Stage II vapor recovery, Vapor Recovery means the collection of the vapors that would normally escape into the atmosphere (and into the lungs of the motorist) while a vehicle is being refueled.  The vapors so collected would be either stored in the Fuel Storage Tank or processed in some manner.  In the past vapor recovery systems that address this problem have been termed Stage II vapor recovery systems, with Balance and Vacuum Assist being the major forms of Stage II systems.  With the introduction of ORVR, the vapors are not supposed to even be able to leave the vehicle, making the use of external vapor recovery systems unnecessary.

Go Back to FAQ.

FAQ003 What is meant by Stage(Phase) I Vapor Recovery?

Stage I vapor recovery is the term applied to the control of vapors during the transfer of fuel from a fuel distribution point via tank trucks to the refueling sites (service stations).  In Stage I (called Phase I in some areas), the tank trucks are equipped with a dual hose system, and the Fuel Storage Tanks (FSTs) are equipped with two mating ports for these hoses.  One port is for the fuel to be delivered to the FST, and the second port is for the vapors in the FST  (in the volume above the liquid fuel level) to be returned to the tank truck.  In essence, the tank truck arrives with a full tank of liquid fuel, and exchanges the same volume of liquid fuel for a volume of vapors that were in the FST.  The tank truck returns the fuel vapors to the fuel distribution center where they are again exchanged for a volume of liquid fuel.  What the distribution center does with the vapors is outside the interests of the ORVR group, but the vapors are essentially recovered and, supposedly, reprocessed. 

Go Back to FAQ.

FAQ004 What is meant by Stage(Phase) II Vapor Recovery?

Stage II vapor recovery means the external collection of the vapors that would normally escape into the atmosphere (and into the lungs of the motorist) while a vehicle is being refueled.  The vapors so collected are returned to the Fuel Storage Tank (FST), essentially taking up the same volume in the FST that the dispensed fuel occupied.  Balance and Vacuum Assist systems are the major types of Stage II systems.  With the introduction of ORVR, the vapors are not supposed to even be able to leave the vehicle, making the use of external vapor recovery systems (Stage II) unnecessary.

Go Back to FAQ.

FAQ005  Why do we need  ORVR?

Very good question.  ORVR was a very good idea over 20 years ago when the question of collecting the fuel vapors during refueling first became a national health priority.  However, it was realized that it would take over 20 years for all motor vehicles to be converted to  ORVR, so the EPA  (and CARB) decided to implement Stage II, which could be mandated and enforced in a much shorter time frame.  However, instead of beginning ORVR conversion at that time as well, no further consideration was made for ORVR (as far as mandated implementation is concerned) until recently when it was mandated nationally, and now we will begin the slow, 20 year conversion with the 1998 model year automobiles.  Not until early this year did the obvious concern about compatibility with the existing Stage II systems  become seriously examined.

Go Back to FAQ.

FAQ006 What is the schedule for implementation of ORVR?

To the best of our knowledge, the schedule now is as follows:

Automobiles:  40% of 1998, 80% of 1999, and 100%  of 2000 and beyond models will be equipped with ORVR. (A small percentage of total us auto population for many years.)

"Light Trucks" and similar vehicles:  40% of 1999, 80% of 2000, and 100% of 2001 and beyond models will be equipped with ORVR.

Heavy Duty Trucks and other Vehicles:  Not sure if they will ever be required to have ORVR.  Last we heard, it was still a discussion item.

Go Back to FAQ.

Go Back to Home Page